hello everyone

sorry if this has been brought up loads but does the punto 60 cylinder head fit the 1.1 cinq block

cheers
mike

yes it will

Assuming Mk1, yes. Mk2 Puntos are MPI.

cheers

oh does the 60 head on the 1.1 block still take the standard cinq head gasket

yep

it will do yes but if your planning on not changing it i would change it whilst your there

finally in the right place, will a Punto 12. 8v cyl head fit a 1.1 Punto?

I need to know whether its worthwhile fixing the boy's car or scrapping it?

thanks for any replay..

ta..

gassar

yes it will fit. there all fire blocks so have the same layout.

and as a note the 1.1 punto 55 is exactly the same as the 1.1 in the seicento iirc

many thanks for the swift repies, plug has had contact with something and when plug replaced eshaust gasses blow out of the oil filler, any ideas before i scrap it?

ta..

gassar..

Get a new block, sounds like the pistons rings are knackered from what your saying.

As said Punto 55 engines are the same, or you could upgrade.

Not worth scrapping the car unless it has a body cancer problem.

Thanks

you will always get a bit of gas coming from the filler. you know its bad when its enough to blow the cap off or the dip stick out.

do a compression test.