Have decided against the coating for the mo, until ive had the car running for a little while. Never recieved an e-mail back. Shame.
Modified clutch cable bought as no record of when it was last replaced.
£28.50 Delivered from ricambio international via ebay
Managed to get a sealey 1.2 16v timing/locking set code: VSE2511
for £18.59 via ebay. For future reference you can buy new from shop for parts for similar price but does not contain the timing tools.
As the car is going to need a larger diameter exhaust made up (50mm / 2" ) It would work out around £600 for a half decent exhaust inc sports cat. So i think i can have my own made up for a fraction of the cost, or at least have some fun playing with metal tubing. The idea is to buy all the mandrel bends, piping, silencers, cat, flexi and tip, cut it to correct size using my old exhaust as a template. This will then be welded by a local welding company to ensure its done properly. Flanges will also be put either side of the cat and flexi so i have the option of decating, it also means the flexi can be replaced in the future without taking whole sytem off. It also gives enough room to be able to drop the engine out without removing exhaust. So from manifold back is all going to be stainless steel. and have started buying parts.
200 cell sports cat from germany ebay from kaido-autosport. This was £95 delivered. Came in 4 days, well packaged and looks a good qualtiy.
2" 150x 50 Flexi from ebay: £20 delivered
1m x 10mm bar exhaust hanger. Measuring the old hangers this should be plenty. £11.50 delivered from pipe-werx
Am very tempted by the setup aaron did using the cherry bombs as they have superb flow, are quite compact and fairly cheap.
20m of 4.8mm > 50mm spiral wrap to cover bay wiring = £11 delivered
2 x new hub nuts from shop4parts and 2l of Tutela Car ZC75 Synth gearbox oil. £35 delivered.
Set or Sport ARB bushes from Strong-flex.eu. £28 delivered. Cheaper than ordering from ebay.
