OK, after wrestling with the in car heater fan housing, ive found the source of my problem, ive removed the fan/motor, and the fan is very stiff and hard to spin.... i presume that is my problem..

So, next problem, where can i get a replacement, and what do i need to replace and at what cost?

Thanks

Adam

might have one spare if you're interested? either p/m me or dj_bucho for details on price

You have a PM brickfoot

Sorted the problem, its somewhere in the wiring that is knackered, the motor had rusted itself, so ive cleaned it all out and its running fine... i chose to rewire it myself and just have an additional switch under the dash.

One thing i need to know.. i need to get the haynes manual but cant get it until monday at the earliest, what can i use for the power source,.... i dont want to run it directly from the battery because then the fan is operational without the ignition turned, so i want to tap off another powered object... what can i do this from?

(the original wiring is knackered and i cant see where its getting its power from.

Any help would be much appreciated, and sorry for the masses of questions and problems i have.

Adam