New here so here goes, has anyone ever changed the main beam arm for the headlights so rather than move it up and down you pull it towards the steering wheel to flash the headlights?

It should do that anyway.
Both of mine had that.

Shoiuld flash if yu pull it toward yu, and stay on if yu knock the lever down with dipped beam on

Tom (AofB)

95 Cinq Sporting - Rattly GrpN Catback Exhaust, <font color="black">Buckets</font id="black"> and 3pt Harnesses,Sexy VW styleé dials (that look great, but dont work!! D)), 10" Sub and 6x9's, ETech Wing. Lots of Dirt!
1242cc Engine to go in soon, boot delock soon, K+N still in garage!

Same on mine. You pull it down and it stays down on full beam, while if you pull it towards you it springs back for when you want to flash people.

Red Cinq Sporting Abarth 1242

if you're talking about changing it to the stalk where the headlight switch is on a rotating part of the stalk, it can't be done as these types of stalks are only specific to the airbag steering wheel models due to the wiring






The Bigger the car, the smaller the dick. Go Cinquecento!!!