Totalcommitment
New member
- Joined
- Oct 27, 2012
- Messages
- 14
- Points
- 4
Hi,
I have searched the the threads on the forum relating to removing the airbag from a Bravo 2, but I'm struggling to do it with my daughters car.
First off, it appears that 2 different types can be fitted and the retaining mechanisms are different. My car has the 2 dimples on the back of the wheel and I have drilled/pushed through these but all I can feel is what i presume is the plastic surround of the airbag case. I cant detect any clips to push no matter what angle I put the torx driver I'm using. I removed the trim to try to access the clips from the rear of the wheel but it's sealed, so no access. I'm presuming that I don't have to drill through the airbag case to get to the clips?
Perhaps its the 'other' type of bag that's fitted but I haven't been able to find any info on how to remove that type. The car is a may 2009 build BTW.
Any advice is most appreciated.
I have searched the the threads on the forum relating to removing the airbag from a Bravo 2, but I'm struggling to do it with my daughters car.
First off, it appears that 2 different types can be fitted and the retaining mechanisms are different. My car has the 2 dimples on the back of the wheel and I have drilled/pushed through these but all I can feel is what i presume is the plastic surround of the airbag case. I cant detect any clips to push no matter what angle I put the torx driver I'm using. I removed the trim to try to access the clips from the rear of the wheel but it's sealed, so no access. I'm presuming that I don't have to drill through the airbag case to get to the clips?
Perhaps its the 'other' type of bag that's fitted but I haven't been able to find any info on how to remove that type. The car is a may 2009 build BTW.
Any advice is most appreciated.