Hi All,
First of all, very nice forum with super info! I have just bought an Bravo 2.0mjet sport. Unfortunately the CN+ completely stopped working.
the problem: key in MAR CN+ turns on with a bright white screen. It will also turn on on the powerbutton with the ignition off but the it stays black. It won't turn off on the powerbutton and there is no function whatsoever.
Tried to solve:
1)reset the car by connecting the battery leads. This worked a few times and every thing worked fine. But after switching off the white screen appeard again. Now this reset does not work at all anymore.
2)checked the 12volt connection (there should be a ignition current could not fine the pin yet) and the ground.
3)Removed the unit and put it in another car. Powerbutton works but screen stays black
4)Completely dissembled the CN+ unit and check every connector/cable and actually there are not much cables 4 to be precise.
5)while disassembling I removed the SD cardreader it could wiggle and not connect properly maybe causing an error.
6)Also found some small button on the bottom of the unit, not sure what it does but tried to use some common reset procedures in the car.
All of the above did not help I am afraid the unit has something broken on the circuitboards (capacitor?). Does anyone know a solution?
To make things even great with the heat now, de AC stopped working as well...probably the know issue with the actuator (only blows top/windows).
Thanks!
Mark
First of all, very nice forum with super info! I have just bought an Bravo 2.0mjet sport. Unfortunately the CN+ completely stopped working.
the problem: key in MAR CN+ turns on with a bright white screen. It will also turn on on the powerbutton with the ignition off but the it stays black. It won't turn off on the powerbutton and there is no function whatsoever.
Tried to solve:
1)reset the car by connecting the battery leads. This worked a few times and every thing worked fine. But after switching off the white screen appeard again. Now this reset does not work at all anymore.
2)checked the 12volt connection (there should be a ignition current could not fine the pin yet) and the ground.
3)Removed the unit and put it in another car. Powerbutton works but screen stays black
4)Completely dissembled the CN+ unit and check every connector/cable and actually there are not much cables 4 to be precise.
5)while disassembling I removed the SD cardreader it could wiggle and not connect properly maybe causing an error.
6)Also found some small button on the bottom of the unit, not sure what it does but tried to use some common reset procedures in the car.
All of the above did not help I am afraid the unit has something broken on the circuitboards (capacitor?). Does anyone know a solution?
To make things even great with the heat now, de AC stopped working as well...probably the know issue with the actuator (only blows top/windows).
Thanks!
Mark
