Hello!
That cheap plastic broke, it's not normal to look like that. There are some guys on the Romanian forum with the same problem. They tried to replace that plastic with some leather trims. Here is the link for that topic: http://www.clubfiat.ro/forum/index.php?showtopic=10693 Although I'm pretty sure you can't understand what they're saying , there are some pictures you might find useful. You'll need an account to see the pictures though.
Good luck!
well, i just get hold of what i can find inside my house. it's cut out from a thick plastic document holder. :devil:
to remove the broken strip, i simply 'pulled' it out bit by bit. lower the lever to remove the top part and raise up the lever to remove the lower part.
using the original strip as a blueprint, i cut out a new strip and simply 'slot' it into the groove. likewise, lower lever to slot in the top and make your way to the lower part while raising the lever.
the plastic strip is flexible enough to bend and slot in easily. took me about 5-10mins only.
i think mine is oming up for replacement soon... it doesnt have a hole as much at the top (or even the bottom)... but at the sides its started popping up a little)... i have my eyes on some material at work
This nearly took my daughters finger off recently when my other half put the brake on and she was fiddling there with earphones. I never really noticed it till then.