General window washer

Currently reading:
General window washer

msi64

New member
Joined
Mar 28, 2007
Messages
53
Points
17
Hi new to this Forum so be kind. I have just bought a Fiat Brava totally fallen in love with it but have a strange question

I have a rear window wiper and the ability to turn on the water jet but cant seem to find the nozzle am I being stupid???
 
right.

open the boot and remove the plastic panel on the back of the lid.

(under the rear windon)

you should see the pipe . usually they just fall of the end.

i need to do mine at somepoint (when i can be bothered)

use a bit of glue or tape to keep it in place and secure ;)
 
yeh i have the same problem but with me i think its because i live in an area with really hard water (loads of limescale in it) it sometimes blocks the pipes up. So if you do remove the plastic panel and find the pipe IS attached then it could be because of this.

Hope this helps let me know how you get on i really need to unblock mine.
My cars getting MOT'd soon. :p


Ricky
 
Do you lot not read????


The nozzle is built into the base unit of the rear wiper. Looking from the top you will see a small indentation with three or four holes, thats the nozzle.
 
Thanks very much for all the help didnt see it in the wiper ridiculous place really
 
yeh sorry should have said it was there, just fixed mine, turns out he pipe had fallen out and the nozzle was blocked with calcium build up. What a stupid design from Fiat there!

Im so surprised the pipe isnt fixed properly into the nozzle, not exactly a smart design it has to be said!
 
hi everyone. i have a brava on a s reg. i had the problem with the rear wiper not working so i change it but i'm still having trouble with the washer not working. there is no noise when i turn it on. the front works fine apart from a little leak which i 'll be sorting out over the weekend. can someone help me with this problem
 
Back
Top