Technical Brava 1.4sx gear change problem

Currently reading:
Technical Brava 1.4sx gear change problem

delllled

New member
Joined
Nov 17, 2006
Messages
11
Points
6
Any assistance would be welcomed regarding a fault on my Fiat Brava 4.1sx P reg 5 speed manual change. The gear change seems to have rotated to the right by itself 1st and 2nd gears are now in central positions, so I have now lost 5th and reverse. The gear stick will not go over to the left of the access window in the tunnel. Any technical assistance will be very much appreciated.
 
4.1 refers to 4 forward gears work and 1 dont------ reverse dont count----checked linkage seems ok --- drives ok in 1 to 4
 
the linkage cable and the linkage bar could be to blame, but i think the selector may have dropped at one side. try pulling the gearstick up to see if the selector has any play.


here's a pic to illustrate the linkage setup on the 1.4, it may help
 

Attachments

  • 1.4gearlinkage.JPG
    1.4gearlinkage.JPG
    57.4 KB · Views: 56
hi jug prob seems to be in selectors , main swivel arm on top of g/box flapping in the breeze then solid. need information regarding g/box stripdown or evenparts manual would help mate.
 
Back
Top