Technical Creaking noise

Currently reading:
Technical Creaking noise

bedofercni

New member
Joined
Jan 12, 2012
Messages
21
Points
6
Location
Hungary,Győr-Moson-S
Hi all!

I have a little problem with my Bravo.
When i turn left very loud creaking noise come from the front right part of the car. It is "metallic" sound like something touching the brake or the wheel. Only when i turn left(especially at sharp turns). If the engine is cold it is worst.

I checked the suspension but I cant see any metal wich can contact with the brake disc or wheel. Can this noise came from the servo pump? It is interesting because only left turns are problematic.

Thanks for the helps!
 
Hi! Thank you for your answer. I will check that but i dont think it is the top bearing, because the problem occurs at continous turn, not when i turn the steering wheel.
For example: if i go in a roundabout it whines/creaks all the way. If i move the steering wheel back a little it stops for a second and starts again until i go straight or turn right.
I'm afraid it is the servo pump. But why only left turns? Maybe becouse the suspension put excessive back force to the servo pump at left turn? But it has a symmetric geometriy so it has to creak at right turn as well. Anyway thank you again for your time and your help!
 
Turning + noise, check if the CV joints have leaked all the grease out.

Or you could just find about anything.
 
Hi!

So I successfully solved the problem!
It was the splash shield behind the brake disk. The gap between the two was so small, when i was cornering it touched the disk... I bent it a little and the problem is gone. Thank you for your help!
 
Back
Top