General 1999 bravo offside outer sill

Currently reading:
General 1999 bravo offside outer sill

hoppyclan

New member
Joined
May 27, 2008
Messages
2
Points
2
Hello all,
Was wondering if you can buy an outer sill for a "T" reg bravo.
I have been to most of the bodyshop dealers where I live and they aren't listed in any catalogues that they have.
I don't know if it isn't a saleable part or else something that is only available from the dealers.
Would appreciate any help or advice on this matter and a rough guide to the price if possible.
Many thanks
 
Last edited:
the rear part only, of the sill will be an attachment of the rear quarter panel, on a 3dr car this is 50-60% of the sill.

Best bet is to cut a piece from a donor car depending on extent of damage or rot. then mig weld a section or patch back in.

a full sill will need to be removed by drilling out the spot welds on the seams
and cutting away from the rear quarter section. to re attach it will need mig welding back in.

If you chop one out, taking more than you need then a bodyshop should be able to trim and refit. :)
 
Back
Top