Technical Problem with electric window

Currently reading:
Technical Problem with electric window

khnuum

New member
Joined
Feb 14, 2007
Messages
35
Points
11
I have a problem with my 1.6 Bravo SX.
The driver side window goes down or up by it self when I click one time on the button, but on the passenger side one you have to keep on pressing until it reaches the position you need.
My problem is that I want the passenger side window to work the same as the driver side one, it's more practical, you just click one time and it's down or up.
What do I need to change, the motor in the door, the relay, the switch or what?
Would be great if someone could answer me. Thanks.
 
the relay behind the glovebox only has a "noise listening" feature on the driver's side. if you replace the relay for the passenger side to one with this feature both windows will be 'one touch'. if both the passenger side and drivers side are built into one relay you are a bit stuck, i think this may be the case on the bravo/a range.
 
I have to look then if I have one relay for both windows or if there are two. Hope I can sort it out.
Thanks jug.

As for the problem mountainmachine posed, all I can say is that my passanger should be very careful when I’m working the buttons … :) if i can get it sorted.
 
Last edited:
sorry to thread crash.
my driver side window doesnt operate by a single click i have to keep it pressed til its all the way up.
what will the cause of this be? if its a knackerd relay where are they? are they these behind the glove box? if not what are they?

relay.jpg


cheers.
cal
 
And 1.9 JTD also :nerner:

But i am also interested in making the passenger side go up like khnuum said.


 
Back
Top