as title,

Might of aquired a new front bumper, only problem being is that it has a crack where the drivers side foglight would be (it doesn't have fog lights tho) right through the plastic (about a 3-4" vertical crack).

Would this be an easy enough fix for me to do or a cheap fix by the bodyshop?

I'm guessing strengthened from the back and then filled lightly over the crack?

Someone please help asap.

Dan

yeah strengthen and fibreglass on the rear.try to get the crack as 'closed' as possible then add the 'glass to seal it.
filler on the front for aesthetics and paint

sweet, gonna smooth this bad boy anyways...jsut hope to god i can get it done in time for donny south!!!

thanks fella.

use a soldering iron to melt a bit of surrounding plastic. Ideal if you can remove the bumper and do this from the rear also. Then fill with a polyester filler. When its hard smooth it with 180/240 grit, scotch brite the surrounding area, degrease with a solvent then water based degreaser (water based degreaser will remove any static) apply a coat of plasic wet on wet primer then a few coats of high build primer. when its dry( air dry overnight or infrared heat lamp for 15 mins)flat it with a 240 disc then a 500 disc and its ready, just need to prep the rest of the bumper ready for painting