I have a 08 Fiat 500 unfortunately caught the front wing on a post which has left a small dent in it. How easy is it to replace the wing? from what I can see it looks like they are bolted on. If this is the case I have found a company on an auction site that can do a wing painted for £120. has anyone used a company like this before and what was the quality like.

Thanks

The paint is unlikly to be an exact match as ideally will need to be blown in to allow for fade etc of existing panels, but it'll be a close match.

Wing is glued/sealed into place also, so removal involves cutting this glue / yanking the wing off, but other than this its a fairly easy job

Thanks for the reply. Where about would it be glued? I can see most of the bolts. Is there a diagram I can get that would show how it's fitted.

Down the 'A' pillar normally. I think its to reduce wind noise

Before shelling out on a new wing

how bad is the dent?

scour the car forums and try and track down a decent PDR guy..... they can work magic....


eg




could well be cheaper and a better option than replacing a body panel especially if its a pattern part and not a oem fiat one