will a punto mk1 hindge fit a mk2

Currently reading:
will a punto mk1 hindge fit a mk2

Re: Another small thread

you will need both parts of the hinge new from fiat ready to weld on there not expensive

is it mk2

if so it's

56538081 £9.20 hinge part one
46835226 £6.47 hinge part two
7658843 £0.63 bolt

to give you rough estimate on price these are drivers side thou so you will need to ask dealer for correct part numbers for your car but price should be similar
 
Re: Another small thread

Didn't get down there today:( will try Thursday

but got another problem my friend confirmed it isn't me what is the cause of my slow fuel pour which also means it can not be the pumps what can cause the pump to knock off all the time
 
Re: Another small thread

Didn't get down there today:( will try Thursday

but got another problem my friend confirmed it isn't me what is the cause of my slow fuel pour which also means it can not be the pumps what can cause the pump to knock off all the time

if you look under your wheel arch you'll notice the fuel filler pipe takes a rapid turn to the front of the car and runs down the front of the wheel well

what you have to do is hold the filler almost 90degrese anticlockwise as to kind of aim the petrol in this direction
 
Re: Another small thread

seen it :) cant i take the bend out?

Cheers

i wondered what that pipe was don't like to touch things i don't know

I thought i had a picture of it but i don't

not tried pointing the gun like that or at least i don't think i have
 
Last edited:
Back
Top