Technical Metal scratching noise from front D/S tyre area

Currently reading:
Technical Metal scratching noise from front D/S tyre area

Lemzip

Member
Joined
May 19, 2004
Messages
492
Points
119
Location
United Kingdom.
get this noise when i turn right.

sounds like metal scratching metal but cant visiably see anything, had new tyres put on sunday.

only happens when pulling out parking space etc not while going round bends with speed.

any ideas?



Dcp02482.jpg
Dcp02478.jpg
ghgh.jpg
Dcp02399vbbv.jpg

mk2 Punto ELX. 17in TSW Apex LTD EDITION anthracite alloys. Sportex backbox, Abarth Headlight Protectors, Full sony install.Recex Pedals and Gearknob K&N Filter, JUST BOUGHT: 5 DR Abarth Side skirts next Abarth bodykit with 3dr abarth front bumper.
 
did the noise happen before u had new tyres fitted? if there wider tread pattern i.e tred goes all the way to the sidewall then they may be catching somewhere when ur on full lock where as ur old ones may have had rounded sidwalls.
Other than that it might be a problem with ur power steering pump or something along those lines!:(
 
same tyres m8.

My car did make4 a slight scratchy noise but nothing like it does now.

might it be the brakes?



Dcp02482.jpg
Dcp02478.jpg
ghgh.jpg
Dcp02399vbbv.jpg

mk2 Punto ELX. 17in TSW Apex LTD EDITION anthracite alloys. Sportex backbox, Abarth Headlight Protectors, Full sony install.Recex Pedals and Gearknob K&N Filter, JUST BOUGHT: 5 DR Abarth Side skirts next Abarth bodykit with 3dr abarth front bumper.
 
I get a grinding noise from my front left brake. I can only hear it when ive got the passenger window open.

I know y this is tho- i had to take a bolt out of the hub (that held the disc in along with the wheel bolts) to make my alloys fit. It was weird bcoz my old alloys went straight on. I dunno whether it was wise to remove it but it was the only way i cud get them to fit and my brakes still work [:eek:)]


EVERYONE- SPRAY YOUR PUNTOS BLACK
sdfdfggd.jpg
fggdgfrdde.jpg
fgfdgdfgfgd.jpg

David
 
Have you checked the brake disc shield? It's easily bent out of shape but only bend it out slightly at the bottom, anywhere else will cause further noise.
 
Back
Top