primeruss
New member
Heres a curious tale I thought I'd share with you all. We recently bought a Barchetta and one of the tail lights was out so I replaced both tail/ stop light bulbs with some fancy red LED bulbs. All seemed fine except the next time we went out in the car and put the headlights on, the ABS warning light came on and stayed on. It reset itself ok when the ignition was switched off but came back on if the headlights were used. The ABS itself was working ok cos I tested it on a wet road and it functioned fine. If we switched off the headlights the light would stay on and only went out when the ignition was switched off. I have now put ordinary bulbs in the tail lights and all is ok again!
What is going on?
What is going on?