Hi guys,

Quick question, should the barchetta clock have light? Mine is absolutley useless at night. Could there be a blown bulb?

Yep, whip out the middle console just about 5 philips screws (four around the gearstick) 1 under the ash tray)
Undo all the plugs and turn it over there should be a little bulb housing which twists to remove.
Replace the bulb!

Thank you Afroking. Let me give it a bash.

Ive just done this and removed the bulb !!
But what is it ?
1w, 2w or what.
Where can you buy it ??
Muchas gracias por tu ayuda

Try these on eBay. It’s what I Bought 20 X 286 INDICATOR DASH CAR AUTO LIGHT T5 BULB BULBS 12V 1.2W CAPLESS WEDGE.
I think they also do them in 2.3W.

I'd go LED as much cooler and reliable.
:idea:

I used these in both the clock and in heater control illumination: 1,2W, Base W2x4, 6d (T5).

Zpj, Thanx, ive bought them on spanish amazon as im not allowed out.

Dismantled evergthing and replaced the bulb, and hey presto it works now. Had read here somewhere someone mentioning that the heater controls are illuminated aswell !! Ehh not mine, so i thought whilst im here Ill take off the heater section of the console, i removed the 2 bulbs and put in the spare one i had bought. Tried it but nothing ?? So prob is more than the bulb ??
But to get to the wires behind the heater bulb was a bigger job than i fancied at that time !!
So put it all back together.

Foto, has anyone fixing issue with heater bulbs ?