when painting, you can paint only hard parts. like door handles, plastic covers and similar thing... you can't paint rubbers or other soft parts.
all sprays have to be warm, you can put them in warm water (don't boil them) and :tosser: for about 1-2 min before use.
1. take off part that you like to paint (and remember where you put bolts)
2. give a nice clean with nitro to remove all fat and dirty
3. it's good to :tosser: with sand paper to gloss surface (1000-2000)
4. two hands of plastic primer in interval of about 30min - first you spray edges and flat parts. this primer will create a kind of coat and paint will catch better to surface.
5. go to smoke (NOT IN SAME ROOM!) and came back in one hour.
6. surface must be smoothly, if not take sand paper of 1500-200 and :tosser:
7. clean it after...
8. now you are ready to paint. you have to... shake spray can for about 1-2 mins.
ok, when painting with spray don't spray directly to surface, spray
in the blank and then to surface. also, release button of can when you are spraying in blank. because, it may happen that can will spit into surface.
btw: i used colour for 800°c why? it is more adhesive does not drip so much and doesn't have laquied inside, for glossines you use real laquier.
when spraying don't be to long at same place, its better to move hand fast left-right no matter if surface is not cover completely. it's better to paint 3-4 times in thinly layers than i one thick layer.
also, on parts that you forget to spray with plastic primer, or some dust or dirt is, it is possible that after painting with color, will came out some damn black dots 'n' spots... don't worry, that's why we paint in 3-4 layers. after 3-4 layer they will be covered, take 5-10 min interval between layers.
waiting until dried (don't try with fingers if is dried!!!)
now you can use glossy lacquer in the same way as i describe for painting. you can put more layers of that, it will protect surface from scratching. and leave until tomorrow... tomorow you can also put another layer of laquier.
you should take time for that, painting is quick part, but waiting.... and waiting...
result
btw: will create tutorial with picture on next painting.