Fiat Punto 1.2 16v Mark One Upgraded Throttle Body (Also Cinq Sei 1242/1368 16v)

Currently reading:
Fiat Punto 1.2 16v Mark One Upgraded Throttle Body (Also Cinq Sei 1242/1368 16v)

Will it just bolt on, and the engine management will cope fine? Will it mate with the standard intake system, or do you need an adapter?

How is it at low revs with this TB? Does it lose torque low-down?

I've got a Punto 1.2 16v (85), this will fit right? My Punto is on an S reg.

Cheers :)



EDIT: You on the Alfa forum? Notice you've got a GTA.. I've got a 156 with a 3.0 in it :D
 
https://www.fiatforum.com/cinquecento-seicento/143570-fiat-seicento-1-4-16v-118bhp-poland.html

If you look at thread above on P.1 you will note a pic of a standard 1.2 16v t/b and the upgrade, you will also note the stud patterns are identical.

Therefore fitment for you should be no problem.

It would definately suit a car better with a good induction system though. Engine management will also be absolutely fine. The Mk 1 1.2 16v ECU is quite flexible.

I have one fitted to my Seicento and there seems to be nothing adverse at the bottom end of the rev range, just a much better pick up at higher rpms.
 
Cheers, I've stuck a bid down, will watch this one.

Just out of interest, what car/engine did this throttle body come from?
 
Back
Top