I have fiited a hard wired dash cam into my 500L MPW so decided to do a small guide to help others. This was very easy to do and took around 60 minutes.
You will need (can't post links, all are available from Amazon.co.uk )
Step 1
Remove the interior light by pulling down on it. It is held on by clips at the front and back.
Step 2
Remove the cup holder by pulling it up. Unclip the plug from underneath the socket. The wires we are going to use are black (neutral) and the white/red (live).
Step 3
Pull the rubber seal out from the driver’s door.
Step 4
Feed the cable through the exposed areas.
Step 5
Using scotch locks, secure the cables to the wires.
Step 6
Put it all back together and place your dash cam with its best view of the road
You will need (can't post links, all are available from Amazon.co.uk )
- A dash cam!
- Hard wiring kit
- Scotch clips x 2
Step 1
Remove the interior light by pulling down on it. It is held on by clips at the front and back.
Step 2
Remove the cup holder by pulling it up. Unclip the plug from underneath the socket. The wires we are going to use are black (neutral) and the white/red (live).
Step 3
Pull the rubber seal out from the driver’s door.
Step 4
Feed the cable through the exposed areas.
Step 5
Using scotch locks, secure the cables to the wires.
Step 6
Put it all back together and place your dash cam with its best view of the road