Technical Please! Need Help! Can't start Fiat 500 1.4 Multiair

Currently reading:
Technical Please! Need Help! Can't start Fiat 500 1.4 Multiair

Grig

New member
Joined
Sep 2, 2019
Messages
1
Points
1
Hello everyone. Im happy to find this great place. :slayer:

Please help me Im so confused. Bought Fiat 500 from US salvage and imported to my country. Engine is 1,4 multiair. It was sold as [Run and Drive], but It is passed more than 10 days, we tried many tricks from forums and internet, but we cant start the car.
Here is what car doing.
It crancks and sometime it is like there is no compression in engine, and sometimes it is shaking good like will start soon, but not starting.



I have big hope on you! Any suggestions will be welcome...

English is not my native language, so sorry for mistakes. I hope you will understand my description.

Here is what we tried, with no success. :bang:

1. Battery charged, tested 2x different ones. It has 12,7v voltage.
2. Starter changed, it was rotating slow, and we changed it but no luck.
3. Black dot under oild cap is pushed, with cranking. (we read about that on forum)
4. Engine oil drained, and filled again.
5. Spark plugs changed to new ones, it is sparking good.
6. OBD2 isn't showed any faults.
7. We can hear fuel pump when key is opened.
8. We doing all this with dissconnected air plastic cup of engine.
9. We do cranking this way. Holding 10 seconds for 2x, 3x times, and leaving for rest 5-10 minutes.
10. I see nothing unusuall, for except some not big oil marks on transmission unit under car.
11. There is long beep after check engine light and oil light when I open key and wait before starting. I dont know is it ok or no)
 
Last edited:
Back
Top