Hi all And Hello to everyone.

I have a 2013 1.2 8v Fiat 500. It recently had the flashing mileage syndrome...I did a scan with my multiecuscan multiplexed tool and I ran a Proxy alignment as it stated in the cansetup/proxy alignment section to align the modules.

The problem I have is no Blue and Me working. When I scan the vehicle modules I have no access to any blue and me modules? When I go into the system/dashboard control module section I have no access to any of what I assume are the Blue and me Modules.

It shows these 3 but I have no connection to any of them.

Convergence Lauberhorn (Blue & me)
Convergence Marelli/Microsoft (Blue and me)
Convergence Marelli/Microsoft C3 (Blue & me)
My instrument panel Module is Marelli so I'm guessing I should be able to access either the 2nd or 3rd option.
Can anyone shed any light as to wether I should be able to access one of those modules?


The Blue and me was not working prior to the Proxy alignment.

The initial scan prior to the proxy alignment showed that the Convergence Telematic Node (CTM) was Removed? I am guessing thats the module for the Blue & me and it has failed hence it states its been classed as 'removed'?

After the Proxy Alignment the Convergence Telematic Node is no longer visable in the list of modules in the can set up section.

I hope that makes some sense to someone and thanks for any help or advise.