Hi Guys, can anyone confirm where the fuse is located for the blower motor on my 500 1.2 POP please? I know there's a fuse box inside the engine bay by the battery and inside the glove box but I'm not sure which one it is.

Thanks in advance.

funkit said:

Hi Guys, can anyone confirm where the fuse is located for the blower motor on my 500 1.2 POP please? I know there's a fuse box inside the engine bay by the battery and inside the glove box but I'm not sure which one it is.

Thanks in advance.

Click to expand...

According to my manual it's fuse F08 in the engine compartment fuse-box.

This any help

Hi Many thanks for the info guys much appreciated. I checked the fuse and all was ok so I had a look at the motor itself removed the connecting block did a check to see if there was any power going to the motor and all was well there.

In the end I removed the motor unit tested it directly on the battery and it worked !!

How strange so I removed the actual motor from the body and sprayed some WD40 on the moving bits along with a small amount of fluff refitted and all working fine now.

Mind you when I did a voltage test I noticed there was 11.6 Volts going to the motor so I was thinking maybe it could be an earth issue somewhere? Or just a sticking motor.

Ah well all is fine so I'll see howling goes.

Oh and by the way I bought a Haynes manual went through that intially but it's totally useless in my view. Unless I'm getting things mixed up it was telling me to remove a lot more bits than necessary. All I did was remove the bits of trim then connecting plug then undo two small nuts twist the motor housing clockwise and the motor just pulls out.

Thanks again guys.. .

Could be the resistor block starting to fail, but generally it will always work on max?