Styling Installing fiat 500 sport bumpers on a pop
- Thread starter alex0311
- Start date
Currently reading:
Styling Installing fiat 500 sport bumpers on a pop
The only difference between the Pop and Sport bumpers is the grille has holes for front fog lights. I'm sure you can buy just the grille from a pop quite cheaply.
No, they won't fit because of flux capacitor clearance issues.
It means that the bumpers won't fit over because the earlier flux capacitors on the pops were larger and don't fit under the sport bumpers.
As sure I am that you asked this question before and got an answer already.....are you 100% sure about this?
Oh for Petes sake! You were told yesterday that they'd fit, today I am just taking the ****. You got your answer yesterday, why ask again?
and yesterday we said they'd fit...
But what about the Flux Capacitor
It may need recalibrating as the change in bumper to exhaust clearance combined with the modified surface charge retention of the sport bumper may have changed the effective dielectric conductance to the rear subframe.
Alternatively the thronomeister could be reset to operate in tangential mode, thereby negating the increase in dielectric conductance.
That is all made up...this forum is to help people not wind them up.
The sport bumpers will NOT fit unless you are using alloy wheels and have leather interior, another thing you should do is run 100 octane fuel for 3 weeks before attempting to swap them over.
When you get the old bumpers off drive around for 23 hours without them to prime the car ready for sportiness (if you dont do this there is a higher chance of bumper rejection) on the 24th hour swap the bumpers but this MUST be done quicker that 60 mins and no faster than 55 mins.
Any questions just call Maxi on his mobile after 3am.
Alex, they're only taking the p*ss, ignore them.
Dom
Dom
