Reset oil light after service... that is very important. And don't skip the oil change either.
1-turn on the ignition key,
2-press the gas pedal and hold it,
3-press the brake pedal 7 times without relesing the gas pedal,
4-keep pressing the gas pedal for 60sec.
5-Release the gas pedal and turn of the ignition key,
6- Wait for 60sec.
Then turn on the ignition key and start the engine. Check if the service/oil change light turned off.
That's all! The vehicle is Fiat Doblo, works on Linea, Qubo/fiorino also vauxhall combo.
2012 forward...
Moderators's note: When changing the oil on a diesel 500, there is a specific software reset procedure (for the oil degradation counter) which must be performed correctly or serious damage could result. This is in addition to resetting the service light. At the time of writing, there is no evidence that following the procedure in this post will properly reset the oil degradation counter. Use it at your own risk.
