Hi Guys/Girls

What are people using as an upgrade from the standard 126 master cylinder?

I have 4 wheel disk brakes going on my car and have been told the standard master isn't enough. I'd like something that is bolt on if possible and i would prefer if it is slightly over engineered if you know what i mean.

Thanks

Try googling "fiat uno master cylinder". The fiat uno had a master cylinder dimensionally the same as the 126 (nikki) but has a Bigger piston bore of 20.5mm ( over the 126's 19.5mm) so it shifts more fluid with the same effort thus better braking force into the calipers. After that there really isn't much you can do except fit a performance race one which will probably need a lot of fabrication.

I remember you saying you were going to in the future OR you already have 4 wheel disks on your car. Do you have this booster on your car?

If not, is there anyone on here with 4 wheel disks and what is your set up?

No I had front disc conversion, bigger rear cylinders, and a bigger master cylinder. it may not look sophisticated having rear drums but belive me this set up is more than enough to stop the car even with future engine upgrades. The car stops ridiculously quick without the spongy pedal.

Is this the one you're talking about?

http://www.ricambio.co.uk/1266-brake-master-cylinder--fiat-uno-classic-panda

or this one seeing they are cheaper than ricambio...

http://www.ebay.co.uk/itm/FIAT-UNO-...R-P07721-71738443-792040-792895-/331692654404

That's it, there the ones (20.64mm) although I would buy the eBay be, ricambio are robbers

ebay one purchased!

One more part down