hi all, where can i get a gear linkage from? cheers 
General gear linkage for mk1 turbo
- Thread starter gdrake88
- Start date
Currently reading:
General gear linkage for mk1 turbo
Were you at Stanford Hall this year? If so I'm the guy who pointed out your Alternator ware was dangerously close to the heat shield
Best place to get the linkage rods is make your own
I have the joints, just need the rods and measurements for one of the rods as I only got 1 rod with this box (converting from bottom shift) and sold my other set to... Antsuno2 before I decided to convert my current uno
Best place to get the linkage rods is make your own
Antsuno2 robbed from TC said:Here we go a guide to making your very own cheap new gear linkage rods!! i used 4, m8 female r/h thread rosejoints, 4, 13mm bolts + nuts and a few washers, ( £15) a lenth of m8 steel rod,(£4) these will last the life of your ut, the ones on the misses car are absolutely fooked, the only gripe with the car, just type in ebay and you will find heres a link for the rosies, under £20 for new rods, bargain!!!
I have the joints, just need the rods and measurements for one of the rods as I only got 1 rod with this box (converting from bottom shift) and sold my other set to... Antsuno2 before I decided to convert my current uno
Last edited:
OP
OP
thankyou for pointing that out mate, sorting it now while the turbo is out.
that seems a really good solution
that seems a really good solution
