Technical Picture of Left door with trim panel removed

Currently reading:
Technical Picture of Left door with trim panel removed

Modano

New member
Joined
Apr 4, 2012
Messages
22
Points
7
Location
Near Montpellier, France
Hi,
since a couple of years I'm driving the Tipo (1994 1.6ie) with the trim removed (an aftermarket power glass motor was not properly mounted).
Since I gave the car, the lever that allows the door to be openened (from the INSIDE, driver's seat, left hand drive) has been mistakenly detached, and now it is not possible to open from the inside this door.

This lever is a solid wire, with a plastic protection around, that goes from the door knob to somewhere.
I couldnt find (with low light and few space around) where this wire goes.

Do anyone has pictures of the door with the trim removed, just to see approximately where this goes ?
If I can earn another door trim removal on the other door, it would be perfect..

Thanks !
 
Found that, but maybe a picture would help the same way :) - Part 11 -
naread.exe
 
Hi! If you have the trim removed you could consider removing the "1" part for checking, it should have two parts which can move, with an hole so that "11" and "9" parts could fit into them.
"9" is for locking the door, while "11" opens it.

The holes I am referring to may be the two ones shown in "1" part on its top left.
 
Back
Top