The FIAT Forum
 Forum Guides FAQs ePER Events Gallery Classifieds Blogs Shop Arcade Links 
Register Members List Search Today's Posts Mark Forums Read Tags

Go Back   The FIAT Forum > Guides > Tipo Guides
Reload this Page

Front brake pads/disc. Removal and refitting.



Comment
 
Article Tools Search this Article
<!-- google_ad_section_start -->Front brake pads. Removal and refitting.<!-- google_ad_section_end -->
Front brake pads. Removal and refitting.
Published by Hellcat
06-11-2005
Front brake pads/disc. Removal and refitting.
Tools you will need
  • trolley jack
  • 15mm combination spanner
  • 13mm socket or combination spanner
  • 12mm deep 6 side socket or combination spanner
  • file or wire brush
  • pair of axle stands
  • G-clamp
  • High temperature grease or anti-sieze compound.
Read First!
  • Before jacking up your car apply the handbrake firmly and chock the wheels.
  • Avoid getting grease on the disc or pad. If you contaminate the disc/pad clean them with brake cleaning fluid.
  • Check your brake fluid level. You are going to force the piston back into the caliper. If the fluid level is too high you will spill brake fluid all over the back of your engine.
  • Brake dust is nasty stuff. Do not blow it away with compressed air. Brush it off in a well ventilated area.
Contents

Article Tools
Show Printable Version  Email this Page 
<< <    Next Page: Removing the brake pads (Page 1 of 4)    >  >>
Comment

« Previous Article | Next Article »

Currently Active Users Viewing This Article: 1 (0 members and 1 guests)
 
Article Tools Search this Article
Search this Article:

Advanced Search

Posting Rules
You may not post new articles
You may not post comments
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:31.

Copyright ©2002 - 2008 FIAT Forum
Proudly hosted by iNETFX Message Boards and Forums Directory

Contact Us - FIAT Forum - Archive - Privacy - Top