Styling Wrapping front chrome

[Gc1989]

Anyone know how to remove this? as i want to wrap it with Gloss Carbon fiber

 

[ItsMagix]

Anyone know how to remove this? as i want to wrap it with Gloss Carbon fiber

Tried to do this the other day actually, I second this question


Chad - Newcastle under Lyme

 

[joedellis]

You have to remove the front bumper to get it off the car.

 

[Gc1989]

that isn't happening lol it can get Wrapped on the car!

 

[Gc1989]

hey folks just a little update

Can't do it without removing the bumper . It's screwed onto the back of the bumper with 2 or 4 screws, can't remember. Removal of the bumper only takes 10 mins, 4 torx on to of the bumper, 4 underneath, 3 in each wheel arch. Pull the bumper from the arch gently and then unplug indicators and foglights.


Graham - Glasgow

 

[Mkala]

Any picture of result ?

Plastidip can be done without removing anything, but it's not the same result as wrapping...

 

[1994deano]

Plasti dipping works quite well, In the summer I did my badge and rear exhaust surround with it.

 

[Gc1989]

no results yet folks the weather in scotland is Shockingly bad !

what thinking the plastidip route but really want a glossy look i know you can get glossifiers

would go plastidip route but i can get my ultra gloss carbon wrap cheaper

but once this job is under taken i will get pics up

 

[Andy Monty]

https://www.fiatforum.com/punto-evo/303934-subtle-tweak.html?p=3053292

 

[TheAlfacode]

LOL you don't have to remove the bumper guys.
Bumper holds the grille with clips 5 on top and 1 on the bottom of the fiat badge, unscrew the two screws on the upper side of the grille that holds grille and bumper and that's all folks!
Been there, done that many times!