- Joined
- Dec 18, 2012
- Messages
- 120
- Points
- 51
Once again hi all I would like to know how I would be able to stop the cut of switch in the management system from cutting out the engine/boost . Please help .
Technical Uno turbo mk2 engine cut off switch .
- Thread starter Fiat uno turbo original
- Start date
Currently reading:
Technical Uno turbo mk2 engine cut off switch .
is it cutting the spark when you go over 0.7 bar? that would be the over boost switch that is located in the side of the plenum chamber.
you can just unplug it, but if you up the boost you MUST sort the fueling or you'll run lean and melt pistons :bang:
you can just unplug it, but if you up the boost you MUST sort the fueling or you'll run lean and melt pistons :bang:
OP
OP
- Joined
- Dec 18, 2012
- Messages
- 120
- Points
- 51
So what can I do to get more boost / power . Maybe a stage 2 turbo ??
No you need to concentrate on the fueling first.
If you just give it more boost without more fuel your air to fuel ratio will go too low and you will run lean that will distroy your engine before you know it..
Ask what options you have over on the the Unoturbo forum
http://fiatunoturboowners.forumotion.co.uk/
If you just give it more boost without more fuel your air to fuel ratio will go too low and you will run lean that will distroy your engine before you know it..
Ask what options you have over on the the Unoturbo forum
http://fiatunoturboowners.forumotion.co.uk/
