General Retrofit LCD Instrument Cluster

[grun500]

Ok. I see. only blue and me won't work.

Blue and me will not be visible in the cluster, but you will be able to use your bluetooth via voice control

 

[grun500]

oto dobre wieści w kontakcie

Please reply in english.

 

[tacim]

Sorry, my phone went crazy. No longer applied when he translated what he wrote.

The good news is that Bluetooth will be available
. I just need to buy MES or alfaobd

 

[GettinBetter]

I have here the same error. I guess because the current bcm is the old type.

I have ordered a new another BCM, to play with.

Is your cluster missing the vin number?

Didn't see it in the dash, but was in the Info Details list of ECU's.

Played with extending the number of bytes today with MES, from the standard 85 to 157, then to 193, I have yet to fully test the results, although I did notice that the proxi alignment did write new values to some of the '00' values that I'd inserted.
but there are some settings, that I couldn't change before that I never got around to retrying.
Jurys out so far.

 

[grun500]

I have ordered a new another BCM, to play with.


Didn't see it in the dash, but was in the Info Details list of ECU's.

Played with extending the number of bytes today with MES, from the standard 85 to 157, then to 193, I have yet to fully test the results, although I did notice that the proxi alignment did write new values to some of the '00' values that I'd inserted.
but there are some settings, that I couldn't change before that I never got around to retrying.
Jurys out so far.

Is there a full overview what all the bytes are?

 

[tacim]

probably at the Fiat service center

 

[tacim]

I just need to activate the automatic transmission and the mileage from 10 to 120

 

[GettinBetter]

Is there a full overview what all the bytes are?

Not found one, there are many posts on the MES forum asking for one, but they never get an answer.

 

[GettinBetter]

I just need to activate the automatic transmission and the mileage from 10 to 120

Did you try this MES page for the 'automatic transmission'?

 

[grun500]

Not found one, there are many posts on the MES forum asking for one, but they never get an answer.

I’ve started to make it myselve with the info of the MES forum

 

[GettinBetter]

I’ve started to make it myselve with the info of the MES forum

Lol, me too.

I was thinking of making an exe so that I can copy & paste the byte lists from the MES forum into it and it lays it all out properly, so that you can analyse it more easily.

 

[grun500]

Lol, me too.

I was thinking of making an exe so that I can copy & paste the byte lists from the MES forum into it and it lays it all out properly, so that you can analyse it more easily.

Same here

 

[GettinBetter]

Same here

That way all the part numbers can be added... but I'm only interested in the 500 twinair, what's your car flavour?

 

[grun500]

That way all the part numbers can be added... but I'm only interested in the 500 twinair, what's your car flavour?

I have a 2008 1.2 lounge

 

[GettinBetter]

I have a 2008 1.2 lounge

Mines 2013 0.9 twinair Lounge - Remapped, removed Blue & Me, third party head unit, TFT speedo.

What software would you use for exe's?

Could you post your byte list?

 

[grun500]

What do you mean with exe?

 

[GettinBetter]

What do you mean with exe?

What software would you use to create an executable to manipulate your byte Lists?

I'd use Visual Studio, but that just me. What's your preference?

 

[grun500]

I’m just making a list with the bytes in excel

 

[GettinBetter]

I’m just making a list with the bytes in excel

LOL, yeah done that (not in Excel, I've only got the poor mans version, i.e. Open Office) but after copying four lists from MES site to compare, I got fed up.