General Connector lambda sonda

[Aferna]

I've seen two wires in the lamdba connector are cut, so lamdba sensor is failing.

Do you know if this connector could be repair or I have to change it using a new one?.

 

[aurick86]

If it's on the sensor might be time to replace the whole sensor, it's a consumable and should be replaced every 100-160k km.


If it's on the harness side then repair it.

 

[Aferna]

Thanks Aurick. The problem is on the side towards ECU. The problem is the cables are cut flush. I don't know if I could repair it with a liquid welding or even with a tin drop. Do you know if I can remove a pin from this connector?.

 

[aurick86]

The connector might come apart. If it does it can be repaired right.

Otherwise find the connector online ebay/ ali/ china etc;
Or go to a breakers yard and cut one from there...the Stilo 1.4,1.6 Or GP 1.2,1.4 might also work...cut it such a way to have plenty of wire to solder...~10cm