Hi every guy,

I'm the second owner for my car (1993) TEMPRA 1.6S,whereas the first hand owner equipped it with alarm and remote central lock system (the car origenal central lock relay is not exist). The black block of this remote system(CPU)located under beside the fuses and relay board with its eight wired terminals was lossen from its connection points in the fuses and relay board without knowing its places to re connect !!! Accordingly now the centre lock,A/C,windescriper,and others are not functionning at all ??!!
Any guy could help and advice for wiring connection knowing that the wires color of the remote black block(CPU)are: Red,Black,Blue,Green,White,Brown,Red and Black consecutively from right to left.
best regards,

Amendment to my previous message,alarm&centre lock

Hi every guy,

I would like to add a new more information to my previous message as a result of my trials to solve on DEC.28th 2008.
I opend that black block (CPU) which is a plastic box (I think it is made in China)and I found a printed circuit board inside with eight outlet terminals each of them marked by a white printed leters in following way:

+ B -- to the Red wire in socket of black block (CPU).
GND -- to the Black wire in socket of black block.
MUP -- to the Blue wire in socket of black block.
MDN -- to the Green wire in socket of black block.
DN -- to the White wire in socket of black block.
UP -- to the Brown wire in socket of black block.
DN -- to the Red wire in socket of black block.
UP -- to the Black wire in socket of black block.
Also,the car key is separet from the remote.the remte has a four buttons in the following arrangement:

Arm Silent

Disarm Engine


waiting replay with thanks,