I stripped my skyroof out about 5month since took lots of pics . It just stopped working properly the cable was popping out here and there and there was a slider broken. I have finally got it almost back together after recovering from a spine operation apart from one plug I cant find a socket for. I have put a white circle round the spare plug if anyone can tell me where it goes I would be grateful. The plug has four holes for the pins to go into.

johnson550 said:

I have put a white circle round the spare plug if anyone can tell me where it goes I would be grateful. The plug has four holes for the pins to go into.

Click to expand...

The only flat 4 pin connector I know of is shown in the roof console below. This console is for Stilos with alarm and CN+, but without the sun roof, so perhaps the plug is left spare in cars with the roof.
.

Thanks for your reply thats a relief I ll stop looking now. You know the yellow square you drew can you tell me what the square white plug is for next to it.

johnson550 said:

You know the yellow square you drew can you tell me what the square white plug is for next to it.

Click to expand...

That one, and the small white plug on the right connect to the ultrasonic sensors for the alarm. There will be 2 holes in the console if the alarm is fitted.
.