Hi,

so i have a 2.4 selespeed abarth semi-auto it started slipping out of gear and now wont go into gear at all and lost most of its gearbox fluid, now im stuck as what to do with it??? am i right that the gearbox fluid in these is the tank by the battery with selespeed on it?? please any help appreciated im despreate and dont want to scrap my pride and joy over this problem:bang::bang:

Your right that's the selespeed oil. Must be a leak somewhere? And some oil to be seen or?

there was a little oil in there ive topped it up but its stalling when going into reverse and jumping when trying to get 1st

In the first instance I would top up the oil and look for leaks. May be the clutch slave cylinder which is inside the bell housing.
You may need to bleed air out of the system after topping up. A simple procedure using Multiecuscan.
Use the correct Selespeed oil. Important!

Think ive nailed it there was a split in one of the pipes only thing is its a nightmare to get at as one side goesa down the back of the engine a little

Re: Abarth Gear prob

Infinite said:

Think ive nailed it there was a split in one of the pipes only thing is its a nightmare to get at as one side goesa down the back of the engine a little

Click to expand...

Story of a Stilo Abarth.. But hopefully something can be removed to give you some room.

Re: Abarth Gear prob

Don't really want to remove the (I think) break fluid container and not sure what's next to it but it has alot of pipes going into the top next to the gear box fluid container

Check my tutorial on clutch replacement. Will show you how to get to where you need.
https://www.fiatforum.com/stilo-guides/423752-selespeed-clutch-replacement.html