Hi ,i have a pair of blades alloys and i want to change them with ones from a corsa 4x100 , 17' .
Will they fit withwobbles (16 * 12x1.25mm Thread 60 Degree Tapered Zinc) ?
What else should be aware ?

ady1266 said:

Hi ,i have a pair of blades alloys and i want to change them with ones from a corsa 4x100 , 17' .
Will they fit withwobbles (16 * 12x1.25mm Thread 60 Degree Tapered Zinc) ?
What else should be aware ?

Click to expand...

Will they go on corsa bore is smaller? 56.6 vs 58.1

Looking at the wheels they aint original gm wheels so the centre bore maybe larger than the 56.6 but like @[corcai I would agree the centre bore would need to be checked on the wheels before you buy

I used to own a K11 super s.
Bought some Momo Course wheels for it (15") and the bore was larger than that of the K11.

Luckily, when purchasing the wheels they supplied spiggots with them to match the K11's bore.

Fitted spiggots to the alloys and they where held in place by a very thin circlip.

The wheels then fit snug and felt much better than the 14" skinny steelies (yep 14" as i had Sunny calipers and 13" s would no longer fit)

I did try the wheels without the spiggots installed and it felt like mr blobby, didnt feel safe at all!!

Speak to the wheel manufacter and im sure they will be able to sell you some spigots to make then fit the stilo bore (providing the stud pattern mates up)

Thanks for the answer , so i will need to check the bore and after to buy some spigots and wobbles .
It's my first car stilo ,and i love it

Just out of curiosity ady1266 how comes your changing your blades and where abouts you from and any pics of your stilo. Also the tyre size of the stilo 17" wheel is 215 45 17

Aj80 said:

Just out of curiosity ady1266 how comes your changing your blades and where abouts you from and any pics of your stilo. Also the tyre size of the stilo 17" wheel is 215 45 17

Click to expand...

They need refub and also 2 new tires . So i found this wheels almost new tires/wheels 140pounds.
You can see them in this gif .

The pic you put aint showing mate me personaly for what its worth I would refurb the blades and put tyres on them tbh

Do you have some Blades for sale?


Ralf S.

ady1266 .... Do you have some Blades for sale?


Ralf S.

ady1266 said:

Thanks for the answer , so i will need to check the bore and after to buy some spigots and wobbles .
It's my first car stilo ,and i love it

Click to expand...

Yes, check the bore size, any good wheel website can tell you the bore sizes for your car, make sure stud pattern is same and that the offsets dont differ too much, then source some spigots to make them fit snug on your hub and the car wont feel like mr blobby lol.

Id say the spiggots are a must as i have experienced with and without and it's not very pleasant, few brown skids marks and two days very gentle driving till they arrived for me and all was good again!

Good luck

Ralf S. said:

ady1266 .... Do you have some Blades for sale?


Ralf S.

Click to expand...

Still thing if is worth to change the wheels or to put 2 new tires...
How much they go around ? 215/45/17r

You can get budget tyres for about 40 quid each refurb wise you could keep them silver or change the colour imo white would look good against the blue unfirtunately your too far from me as I would of happily refurbed them for you