Technical central heating unit

Currently reading:
Technical central heating unit

sowyunix

New member
Joined
Nov 16, 2015
Messages
28
Points
8

Morning,

I have a stilo 1.9 jtd, and sorry if this wasalready discussed, but I just registered to the site and I want to ask ifsomeone had the problem before

The central heating unit (bizone), it has amind of its own, if I want to set the fan to blow up on windshield, legs orfront openings, nothing happens. You can hear the fan changing speeds but nodirection , 70% is going on the windshield, 10% on the dash board openings andrest I think on legs, but I am freezing up, so I can’t tell. Do you recon theflap that moves the flow is blocked, can I reset it? Where is it, do you have asketch with it? And the second issue is that it’s changing temperature as it wants,even on manual, if I set left 25 and right 35 it moves back to both 25.

I’ve scanned it and no errors , everything seemsto be ok.



Do you have any idea.. thank you
:confused::confused::confused:
 
Hi, Welcome to the FF.

Try the reset procedure.

  1. Switch the ignition on.
  2. Press and hold the "AUTO" and "MONO" buttons at the same time.
  3. When the number on the display has counted down to "0", release the buttons.
  4. When the noise from the heater stops, switch the ignition off.
'1' flashes if the self-learning procedure failed.
'0' indicates that the self-learning procedure was successful.
.
 
thank you, i will try that later on , and i wil get back with info.:D
 
So, after 5 attempts got 00, but still very low blow on the dashboard nozzles and legs with full fan! It looks like a clap is blocked! And is a constant buzz buzz buzz sound coming from it (not powerful sound but annoying one)

I am sure that i am not the only one who had this! Some GO THERE DO THAT! Including tacking the whole unit apart! Would do a lot of help

Thank you
 
Back
Top