so i bought a stilo jtd 1.9 abarth and the lamp warning light is on the dash

owner said its because of the xenon light

when starting the car num plate light, side slights and front headlight comes up on dash

all lights work fine

gow can i get rid of the warning light ?

Likely to be a little corrosion on the plugs to the lamp clusters.
See my post here https://www.fiatforum.com/stilo/325648-cleaning-contacts.html

or use cotton buds, metal polish then clean off with contact cleaner and then wipe with wd40 or similar. To be honest probably cheaper and more effective to get kit.
I don't recommend sandpaper etc as you will remove any coating FIAT put there to slow corrosion.
Maybe pull clusters out and clean bulbs and contacts. Not hard and when I did it never had another problem.

Maigretnz said:

Likely to be a little corrosion on the plugs to the lamp clusters.
See my p
or use cotton buds, metal polish then clean off with contact cleaner and then wipe with wd40 or similar. To be honest probably cheaper and more effective to get kit.
I don't recommend sandpaper etc as you will remove any coating FIAT put there to slow corrosion.
Maybe pull clusters out and clean bulbs and contacts. Not hard and when I did it never had another problem.

Click to expand...

tried that didn't really do anything when switching the car on and leaving it to stand i can hear the motor for self leveling endlessly going on both sides ?

Has it git led side lights fitted? If so they prob will be non Cambus bulbs

jatkinson said:

Has it git led side lights fitted? If so they prob will be non Cambus bulbs

Click to expand...

it doesnt .. i thin the number plate light is led but i think the front light problem is that the height adjust motor is knackered on both sides and remove the xenon lamps