Technical Trouble getting Stilo manual

Currently reading:
Technical Trouble getting Stilo manual

KevinIson

New member
Joined
Jan 17, 2015
Messages
2
Points
1
I am having trouble with my Stilo 1.2 and have taken external fusebox apart and cleaned up and now I need a wiring diagram to track one problem left. (And need workshop manual to maintain car).

I tried Haynes guides, no manual for Stilo.

I then found download section here and downloaded workshop manual. Many thanks, but I ended up with the .iso file and started on this 3 hour journey trying to get them visible.

I was told I had to mount a drive and downloaded VMWare player and tried to do this. Was eventually told to run an operating system and thus needed operating system number (windows) etc.

This was all getting too complicated, so I looked to buy a manual and could only find the emanual online site and found that there download needed similar virtual drive, so guessing it is the same files.

I am just after, and willing to pay for, simple pdf of the manual! I have found a pdf for the tipo, but of course that is not going to be good for stilo.

I noticed that the .iso has been downloaded many times, so guessing that others have had more success.

Can anyone lead me in the right direction thanks?
 
Last edited:
you don't need to run VMware unless you have a MAC

As long as when you boot the computer you see a windows logo do this:
-download and install Virtual Clone Drive from here
-then you can go to MyComputer... you will see a new drive..
-right click on it.. hover over "Virtual Clone Drive" and click on "Mount"
-browse to the eLearn .iso file , select it and "Open"
-now you can run and install the eLearn application
-after it's installed you can run it using the shortcut on the desktop... (you will still need the .iso mounted anytime you want to run the application)
 
Brilliant!
After a bit of messing around it worked and now able to start diagnosing problems and get to know the Stilo a bit better.
Many thanks for your help,
Kevin Ison
 
Lucky you. I have downloaded that manual that many times only to get this every time I use it


insert.jpg





That is using the computer after installing and using this clone drive.
 
Lucky you. I have downloaded that manual that many times only to get this every time I use it


insert.jpg





That is using the computer after installing and using this clone drive.

You do know it is saying you need to input the cd drive... so make sure you have the .iso mounted.
 
The download is a 7 part zip file and when you guide this software to the download folder it only shows the one file (Stilo eLearn) what does not show any iso file.
 
In that folder do this:
Tools=>folder options=> view...scroll down and make sure the checkbox for "Hide extensions for known file types" is UNCHECKED

Capture.PNG


I'd bet money on the fact you already extracted the multiple archives.. then you got the file "Stilo eLEARN". then you extracted that one .... DO NOT DO THAT!
you extracted the .iso file ...yes the "Stilo eLEARN" is actually "Stilo eLEARN.iso"
 
Last edited:
OK got it now. I still had the software installed from my original extraction. I need to do it all again though as I installed it in bloody Italian
biggrin.gif
Thanks for your help aurick86, much appreciated.
thumb.gif
 
Back
Top