Hello and greetings from Finland,

I have Stilo -04 1.6 and I need diagram for ecu pins. I donated and downloaded eLearn cd but it doesn't work with my mac.. So can someone post a picture? Thanks!

No pinout on E-learn iirc.

stilomies said:

I have Stilo -04 1.6 and I need diagram for ecu pins. I donated and downloaded eLearn cd but it doesn't work with my mac.. So can someone post a picture? Thanks!

Click to expand...

Which ECU?

View attachment M10A M10B.doc

you remembered wrong MEP

richydraper said:

View attachment 107305

you remembered wrong MEP

Click to expand...

Thanks but that doesn't help much, I am a bit newbie and don't understand the destination codes. I should've asked straight away which pins connect to the accelerator pedal? Maybe I'll make a new thread considering my trouble. I have some intermittent fault with acc pedal(P1221 error, goes to limp mode) and rarely the pedal doesn't react at all (engine stays idle). After I release the pedal up it responds normally again. Done a lot of things, cleaned connectors (incl. D4), changed acc. pedal, throttle body from other stilo... So it could be Ecu or oxidation inside Ecu connector (if it's even possible). Next thing that I'll do is open Ecu connector and check that everything is ok there. But which connector connects to acc pedal?

And sorry for my bad english..

I 'll check the Autodata CD when I get home from work...I think it has the schematics.

On the wiring diagram, M10 is the engine management ECU. K55 is the accelerator pedal sensors.

Wiring colour codes on eLEARN wiring diagrams are not always accurate, but these are what the accelerator pedal is shown as.
AR Blue/Red
MB Brown/White
RV Red/Green
VB Green/White
AG Blue/Yellow
HV Grey/Green
.

Thanks Davren! I'll see what I can do and report back.

Hello from Czech Rep,

I have Multipla -06 1.9MJet and I need diagram for ecu pins(0281012294 - 55200651). So can someone post a picture? Thanks!

Mira2B7 said:

Hello from Czech Rep,

I have Multipla -06 1.9MJet and I need diagram for ecu pins(0281012294 - 55200651). So can someone post a picture? Thanks!

Click to expand...

Hi, Welcome to the FF.

You have posted in the Stilo section of the forum.

Post your request in the Multipla section here: www.fiatforum.com/multipla
.

I know, but have the same ECU and there are less than like Stilo.

Just wanted to inform that car has worked fine for many days now! I just done the old "jiggle-the-connectors" fix for ecu. We'll see how long it will last without engine fault.. So definitely something wrong with the connector.

OK
I'll say it differently
please I need diagram for 88kw ecu pins(0281012294 - 55200651). So can someone post a picture? Thanks!