(T) Does anyone know the PCD of the Stilo?

Ive just brought some 17" Wolfrace Ikon alloys and there holes didnt seem to line up properly?!?! I think is has something to do with the PCD?

Does anyone know what the PCD is on the stilo?

Cheers

I think Stilos are 4x100 PCD.

Were the alloys brand new?

On my alloys, which are 4x100 PCD there are 8 holes altogether for multi fitting purposes I think. So make sure you check both ways (four of the holes are 4x100 and the other four are 4x108- I think) Probably dont make any sense there

yeap were brand new.... yeah tried all way round it only fits on every2 holes but the bolt hoses still dont line up....

Had a search - look here:

http://www.fiatforum.com/showthread....ight=stilo+pcd

Oh yeah forgot to mention the wobly bolts......Because the Stilo and many Fiats have a PCD of 4x98, people have to buy 4x100 alloys and use wobbly bolts to allow the slight difference.

Did the alloys come with these?

Well...............im not sure but i think they may have sent them a few days early and they are at the post office.... Will get them 2mora!! and see.... you think that will make a difference?

I would have thought so. If the holes are roughly where they should be, but the bolts can't screw in then they should be your answer

Another thing, on my Punto there was something on the hub of the car that I had to take off to make them sit flush/line up- might be the same on the Stilo

worth a go mate! cheers

Agreed had to pop out a ring from the inside of the alloy lucky they was already out and with my wobbly bolts

pcd for the stilo is 4 x 98. you need "wobbly" bolts to take up the difference on 4 x 100 wheels.

sorry missed that reply about the wobblies.lucky if the bolts were included in the deal i had to get my own.shouldnt have been a tight sod and bought my wheels from ripspeed at halfords.never mind only two more weeks to my jtd arriving.....

correct size spigots for the hub should have been supplied