(T) FREE Fiat diagnostic software

The author has released a new version, might cure some problems?


This is shaping up well by the looks of things, just Motronic 731 please please please

does anyone know if you can reset the service indicator with this software?

No it can't, but it's on the author's list of "What to expect next".

Dave.

Hi guys,

I've had a trawl through the forum trying to get an idea of what's now available for reading the Abarth ECU's but I'm struggling a bit as things keep changing all the time.

Could someone give me a brief "heads up" of what software can do what with the Abarth engine ECU and Selespeed ECU? I've just ordered a £10 VAGCOM KKL cable and I'll see what's what when it arrives...

I really want to control the Selespeed ECU so I can carry out tests once I swap my Selespeed reservoir...

Cheers!

Theres nothing mate, not at the moment. I have a *cough* special copy of alfadiag which will talk to the ECU, but the actuator tests and calibration routines dont work on the CFC-209 thats in the Abarth(alfadiag supports just the CFC-208, and 218), and the author of Alfadiag says he has no plans to support it either.

To use alfadiag you just need the cheap KKL cable that you have got. It think as it stands alfadiag is as good as it gets, does ABS, ECU, will get DTC's from the selespeed ecu and does the airbags as well.

The real deal costs 60EUR though, not too bad and a 1000x better than Gendans italiacheck.

Cheers for that Dan, it's gutting about the Selespeed ECU... I'd really like that. I'm loath to do any work on the reservoir myself without being able to run the Selespeed actuator through it's paces once I'm done I don't want to have to pay a garage to change the reservoir either...

Actually, I plan to add selespeed support to FiatECUScan.
It is not a problem to add support for the CFC-209 version as well. It is a very rare unit. I see in my source data that it is used in Stilo Selespeed only, and that explains why noone has plans to support it.
I think I can add support for all selespeed verisons in my program at the end of this month or beginning of January.

That would be brilliant if you could. I think all Stilo Abarth owners would be extremely happy to see that feature pop up! If it can control the actuator and run the system through it's calibration routines, then I certainly would!

Hi Yani,

If you need any testing doing I am more than happy to help, also if you can get the actuator tests and EOL calibration routine in there for the CFC-209F I will make a nice donation to your project. Rather line your pocket than that of my garage.

Totally agree, Dan! Especially about the garage part!

Ok guys,
I just checked all the data that I have for the selespeed ECU. And yes, I have the actuator test/calibration information. I will try to include selespeed support in a new release of FiatECUScan by the end of this week.

LOL!!! Now that's customer service! A nice donation will be coming your way!

just ordered my cable, not 100% sure of support for my ecu yet, but willing to have a bash, will report back with any progress & screenshots etc later on. Yani this rocks mate, well done and keep up the great work.

Thanks for the tips Dan

I had no joy at all with hyperterminal but changing port properties did the trick

Set the USB transfer size to 64 bytes for Tx & Rx and also set latency to 1mS

As I use a T23 Thinkpad (looking a bit slow but it has a nice hardware D9 port) I dumped the A/V program completely to speed it up a bit and the program worked brilliantly.

What a superb piece of software

Thanks Yani

Hi guys,

I released a new version today.
Selespeed CFC208F and CFC209F gearboxes are now supported.
I have not tested the calibration functions because I don't have where to test.
So, please give me feedback when you test the actuator and calibration functions.