Rear torsion beam question??

Right just a quick one,

might be me just being picky but the rear torsion beam suspension on the stilo, its just that if i measure from the edge of my wheel to the edge of my wheel arch on the left hand side its about a 3mm gap between them

yet on the right hand side its about 10mm between them, as if the entire rear swinging arm is over to the left!,,,, is it adjustable?? to centre it or is it something done by 4 wheel tracking??

It's how it relates to the chassis that matters not the body and I'm pretty sure there's no adjustment anyway.

There's a huge load on the torsion beam when cornering under power so I'm sure you'd get to know about it if there was a problem

cheers argo!
just taken a few pics for you to see.. its 10mm max difference to be honest



right wing




left wing...





if anyone else could just do a check on their stilo it would be greatly appreciated!

took the car for a spin and drives fine, its just considering what happened to it on friday i want to make sure.. it could be like this since i bought he car!

Have the rear bushes been replaced at all

no not as yet... but just had a look at some pics of thw car before the incident on friday and it was the same then!, so must be ok.. im expecting the bushes to go soon mind!

Mine have been changed - so will go and do the paper test when it stops raining......
Interestingly enough after 65k miles they were in good nick - although the boys at my local garage reckoned they would have been fine for another 40k they commented that the rear beam is much stiffer in place than before with the changed bushes.

Hmmmmmmmmmmmmmmmmmmm

cheers for that!, i was always wondering if it has too much end float on it.. it never knocks or anything, just that sometimes it looks worse than others

anyone able to measure the arches please??

what incident?

I decked 2 wheels and a front suspension strut.., have a look in leisure lounge any chance of anyone just mesuring the distances for me.......... please????


im at cross roads at the moment,, i dont want to send an agreement off for a new set of wheels until i know the rear subframe is ok but it a cache 22 because i need the car for work!!... can someone please just go measure the distances on their stilo!

thanks will be given!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Steely, there is nothing to worry about wit that difference 90% of cars have that same gap the wheels (usually on the left side) are closer to the arch then the other side every car i have ever owned has been like that, i dont have a stilo but both my bravos and my van are like that.

cheers bandido! been banging my head against a brick wal all day!, the wheel runs dead and true , i thought it was possibly like that from new but i wasnt sure... and i didnt want to outlay money for another set of rims if the subframe was damaged.. it drives spot on.. cant fault it...


cheers for that! appreciated!

Got around to checking mine last night - about the same as yours I reckon, so nowt to worry about

cheers for that!, had a look at a few stilos at stoneacre today in donny, they are the same too.,. minds settled now!,, cheers!

Ben, just reading up in leisure lounge and that was one hell of a mess you made of one of your wheels.

To finish it off, in your position, I'd take the car for a full 4 wheel alignment check (if you haven't already). If it checks out close to normal then you'll know for certain your chassis isn't distorted. Some places charge less than £15