23-03-2008
| #1 | ||
| Cigar Lighter Problems!!! Spider 2000 Looking for any advice on the cigar lighter fuse. Ive locate it and the fuse inside was a glass type tube with 5A on it. It looks fine. Manual says it should be an 8A. I tried that and its still doesn't work. Any suggestions? Deterimined to get this lighter to work.
__________________
| |||
|
|
|
24-03-2008
| #2 | ||
| Re: Cigar Lighter Problems!!! Spider 2000 Is power going to the lighter? Have you cleaned the connectors and grounds? I seem to remember that this circuit is powered at all times and not through the ignition switch. You either have a bad connection somewhere or a broken wire.
__________________
| |||
|
|
|
|
25-03-2008
| #3 | ||
| Re: Cigar Lighter Problems!!! Spider 2000 No power to the lighter at all. Do you know what fuse is required for this? Thanks
__________________
| |||
|
|
|
|
25-03-2008
| #4 | ||
| Re: Cigar Lighter Problems!!! Spider 2000 8 Amp fuse. When you replaced the in-line fuse with an 8 amp fuse did it blow? Check to see if you have power on the circuit just before the fuse; if not you will have to trace the wire back to find the break or bad connection. I belive that it is connected to the "hot" side of the fuse block. GT
__________________
Last edited by GeorgeT : 25-03-2008 at 13:22. | |||
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cigar Lighter Change | DonSalvati | Stilo | 22 | 29-12-2007 16:55 |
| Cigar lighter for 1.1 active | jgebrown | Panda (New) | 4 | 11-08-2006 22:01 |
| Cigar Lighter | Carlo | Doblo | 1 | 19-10-2004 21:17 |
| cigar lighter not working | marea007 | Marea > Technical | 9 | 20-09-2004 21:40 |
| cigar lighter | alfonzo | Stilo > Technical | 3 | 20-09-2004 20:32 |
