Need new body side molding for a 1981 Spider 2000

I just had the car repainted , its a 50th anniversary edition, and the old molding looks bad and I am missing one of the ends. Anyone have any idea where I can get this or any suggestions on modern molding that would look like it fits?

(I wish I made the decision to go without molding but I didn't, and the holes are still there )

Thanks in advance.

Bayless
1111 Via Bayless
Marietta, GA 30066-2770 Phone: 800-241-1446
Fax: 770-928-1342
sales@baylessfiat.com
Bruce's Parts Bin
6 B Enterprise Court
Sewell, NJ 08080 Phone: 856-582-7770
Fax: 856-582-7444
bruces@fiatparts.com
C. Obert & Co., formerly Fiat Plus
2131-D Delaware Ave.
Santa Cruz, CA 95060 Phone: 831-423-0218
Fax: 831-459-8128
fiatplus@aol.com
Fiatwheels.com
659 Cary Towne Blvd. #196
Cary, NC 27511 Phone: (919) 467-1749
Fax: (919) 467-1749
sales@fiatwheels.com
Fun Imported Auto and Toys
143 Tunnel Road
Vernon, CT 06066 Phone: 860-871-1990
Fax: 860-875-0601
fiatfun@aol.com
International Auto Parts
P.O. Box 9036
Charlottesville, VA 22906 Phone: 800-953-0813
Fax: 434-973-0555

PBS Engineering, Inc.
11602 Anabel Ave.
Garden Grove, CA 92843 Phone: 714-534-6700
Fax: 714-534-4975
pbseng@socal.rr.com
Pierce Manifolds, Inc.
321 Kishimura Drive
Gilroy, CA 95020 Phone: 408-842-6673
webercarbs@piercemanifolds.com
Vick Auto Sports
5200 Vesta Farley Road
Fort Worth, TX 76119 Phone: 800-466-3428
Fax: 817-483-1104
info@vickauto.com

Body molding was a dealer installed option, Fiat did not install it at the factory.


GT

I realize that but there was a common side molding that the dealers all over the nation installed and they were even color matched.

Some dealers used molding that was attached with clips or screws and some used molding that was held on by an adhesive, different dealers used different types - but that doesn't solve your problem. Call Bruce's Parts Bun or Vick's or IAP or any of the other valued suppliers, they will be glad to help.


GT

I appreciate everyones input, and did find a couple people on the list above that i didn't know about, but the reality is that none of the standard Fiat players are much help with this.

I am really looking for either some sort of molding supplier that has an extremely broad selection wrt style and price or specializes in molding for restored older cars.

You also never know when someone reading this might have some old molding that they took off their Fiat and aren't using anymore.

This was a last ditch effort to get lucky.

I have an "LE" what number is yours?. FYI if you need any, I have exact replica decals for the spider. I just posted a thread to give all a heads up. Let me know since you just got a paint job. thanks!

#653.

Ever wonder how many are still out there?

i have the same dilemma with my '80, in that the side molding that was installed at the dealer as an "option" here in Kalamazoo, Michigan. that molding has lost a piece, and the white plastic insert has long since hardened and yellowed.

i disagree that a "common" side molding was used. I have looked several times at suggested sites to replace what I have, and each time find the style is not the same as what is on my car.

since you don't wanna respray your sides, and wanna hide the holes left behind.... i would suggest finding a style of stick-on, self adhesive aftermarket molding generally sold by most high volume, low cost parts stores.

Thats what I ended up doing and it looks very nice. Its chrome with a goldish insert that blends in nicely with the 50th Anniv. gold color.

sounds nice. Can you post a picture?

Sorry it's not a great picture but the shadows were killing me.

If anyone has any more info on the 50th Anniversary Spider I would appreciate it.