Hi All, I'm desperately after some good solid information for the central locking wiring on a Grande Punto 07 (MK3) if possible? I've been all through the forum and Google for a couple of hours now and I only seem to be able to find decent info for the mk2... Is it the same fuse box and wiring?

I've read somewhere that the lock wire requires a470ohm resister, then some say it doesn't? So I'm property confused... And therefore what are the lock and unlock wires on this model?

Any help is greatly appreciated!

Thanks, Adam.

Not one reply, that's amazing...

I fitted an aftermarket alarm to my stilo... Cudnt get it hooked up to the internal CAN wiring properly, which is difficult to test etc, really need the info.. did u check the likes of elearn for wiring? on mine i went old school.... Took door card off, located wires at door lock, tested with DMM to find that one wire earthed on lock, the other unlock. So i drilled a hole on the plastic connector between door and car, there were plenty of blank spots on mine.... I then fed speaker cable through it and into the door... U dont know its there unless you wer to undo the black connector... Works a treat for me, might be an option for you if you're stuck?