Hi Guys (& Gals),

Can someone help me with details of the wires to connect for an aftermarket remote central locking kit.

1: +ve or -ve pulse activation ?
2: Location/colour of the required lock/unlock wires.
3: Colour of the left and right indicator wires.

I know I could probably find them myself by ripping off panels etc, but I would probably damage something in the process. I know the fuse box is behind the glove compartment but it looks like a killer to access the wires there, so I'm hoping for a more accessable location.

Any help would be much appreciated, I've been searching for days for this info and getting nowhere fast.

Is it 2012 model or older
Ian

Hi Ian,

It's the new 2012 model - I can't find any circuit info anywhere for it.

Many Thanks for the info Ian.

I can now get on with the installation later this week.

I plan to produce a "how to do it" guide, with instructions and Pics.

I will of course give you full credit for providing the much needed wiring information.

Once again, thank you very much.

Gavin

Just to confirm Ian, have I interpreted your info correctly, please see attached image.

Thanks

Gavin

send me your e-mail as i cannot upload

[email protected]

Ian

I've sent you my email address

Gavin

Hi Ian,

For the sake of clarifying for myself, I've re-jigged my drawing, have I got it this time ?

Thanks

Gavin

you have two going to door side you only need one
one is left not connected

Ian

Thanks for the feedback, your patience is much appreciated.

I've re-jigged my diagram to accommodate your advice - hopefully I've got it right this time.

Gavin

looks ok

Thanks Ian

I will try and have a go at it this week and if all goes well, I'll produce a "How to"

Gavin