Toad alarm a101cl

took this out of my old car and managed to find diagram but i got a few questions.....

1, Orange wire - Ignition... does this have to be connected?
2, Green wire or Yellow Wire -( door switch/interior light )- are fiats + or - switched
3, 2 Black immobilser wires, im not going to wire this up but do i need to connect the wires together?

i think thats it...

thanks

1 - yes ignition feed wire needs connecting up or else if auto arm is activated the car alarm will sound when driving down the road. its also used to program the alarm flicking the ign on and off ect...


2 - green wire for Neg door trigger on fiats yellow is not used tape it up

3 dont join them leave them how they are if not using them.

4 - im fed up with fitting toad alarms this weekend ive done 2 ai606 and one 201cl lol

thanks fella... now all i gotta do is figure out where all the wires go

wooohooo

Hi all,

I'm removing my A101cl from my 53 plate Punto Active and I am going to fit it on a 07 Grande Punto Dynamic Sport (awaiting delivery). I wondered if anyone can help me with the wiring?

The existing connections are attached to various wires on the left handside multi connector in the fuse box. Is the wiring on a Grande Punto the same and in the same physical place?

Hoppy

Very much different i may have spoke via another forum as these cars are canbus
but it would be possible to fit one i have before well the AI606

Ian

nope......but there is a good(easy to fit)dedicate GP alarm available.

Hi all,

I'd like to thank Ian (Mr Toad Installer) for installing my car alarm today. Despite me sitting on the fence until it collapsed. Ian kindly didn't take the p*ss too much

No doubt Ian will comment on this.... :-)

The whole job took around 3 hours and then I was on my merry way.

Job done.

Hoppy

Take the P--s never but in brightened the dodgy looking day eh

My pleasure mate glad your happy with it

Oh by the way Mark if you see an argument dont sit on the fence